Hybrid (Wired & Wireless) Engineering Alarm KIT
- GSM/LTE/LAN/PSTN multi-network tarnsmit alert, multi-network back up modes for selection.
- It is easy to operate with 4 * 4 keypad and dot matrix LCD display.
- 16 wired zones and 32 wireless zones are shared with zone number. Support multiple zone types.
- Built-in 8 wired zone interfaces in panel. The other 8 wired zones can be increased by developing octuple zone module.
- 3 detectors for each wireless zone, 48 wireless detectors maximum can be enrolled.
- Code classification: 1 program password, 8 user's passwords. Each authority of user's password can be set.
- 8 remote controllers maximum can be enrolled. 8 remote controllers' operation authority is separately controlled by 8 user's passwords' operation authority.
- 8 sub zones can be programmed independently. And the zone list can be set freely in each sub zone. 8 sub zones can be separately programmed to arm/disarm by 8 remote controllers or 8 user's passwords.
- 8 groups of alarm phone maximum can be set. It can give an alarm through PSTN wired network voice and Contact ID.
- Support IOS and Android APP software, user can operate and program alarm host via app software
- Support arm/disarm, system, alarm information pushed in multi-language, alarm information pop-up on the screen, alarm voloe and vibration.
- Zone name can be edited by users, Check all states of the host in real time.
- Fast intelligent networking capabilities, multiple mobile phones at the same time control the host, and optional sharing of features to other users.
- Support ADEMCO Contact ID communication protocol.
- Thorough re-dial mechanism makes sure the reliability of alarm report when communication is busy or fails.
- It has Built-in Siren in panel and supports a wired siren and wireless siren function.
- Support 20s user-defined recordings. Alarm host will playback the recordings when voice alarming.
- Pre-recorded standard voice is preserved in panel. It will precisely report the alarm info when alarming.
- Support preventing false alarm function. The real alarm will happen if zone triggered times reaches preset times within effective time.
- Support arming/disarming/monitoring/propaganda/programing by phone on off site.
- Support SOS button for emergency alarm for elders.
- 4 arming/disarming timers can be set based on weekdays and weekends. Different user list can be chosen to arm/disarm.
- AC and battery power status can be reported to user, optional on/off.
- Arming/disarming status can be reported to user or center, optional on/off. 100 history recordings are preserved in panel.
- A group of normal open/closed alarm relay output interface. Various alarm events will drive relay to output.
- Two octuple relay modules can be connected maximum. Each relay can be set as followed event output or followed zone output.
- Both AC 220v and 12V/7 AH storage battery supply power for panel. Usually, when the storage battery is charging, the power supply will turn AC power into battery power automatically. Also, when batter low power is reported, it adopts limited current discharge protection circuit to avoid battery damaged.
- Less than 4 pieces wired smart kaypad, control the panel to arm/ disarm and daily operation directly, the panel status can be showed in keyboard screen include zone status and multi-system status.
- Support PSTN module, Through PSTN wired network voice and center alarm.
- GSM/L TE module optional, can disarm/arm/monitoring/two way communicates or programming by Dial/SMS
Part No.
ST-2908L
Category
Wired Alarm System
